New 1.6 litre HDi FAP 112 bhp Euro 5 Diesel engine introduced
Significant reductions in fuel consumption and emissions
Available in Sport and SE trim levels
Priced from £21,095.00 on-the-road
The Peugeot 308 CC will be the first model in the Peugeot range to benefit from a new 1.6 litre 112 bhp diesel engine. This new engine is the result of Peugeot’s continual development and optimisation of its diesel HDi FAP technology, widely acclaimed for its performance and efficiency.

This new 1.6 litre HDi FAP diesel engine has been designed to meet the requirements of the new Euro 5 emission standards. It also benefits from a number of improvements over the current 110 bhp unit with improved performance in terms of flexibility and responsiveness, as well as noise reduction, while at the same time reducing fuel consumption and CO2 emissions.

Thanks to its new hi-tech design, this new four cylinder engine with a capacity of 1,560 cm3, and eight valves, has a maximum torque output of 270 Nm at 1,750 rpm, an increase of 12.5% over the current engine, and during overboost, 285 compared to 260 Nm. It also has a very wide operating range with high levels of torque available at all times, ensuring good driveability and reduced fuel consumption on a day to day basis (since the user can drive more often at lower engine speeds): 135 Nm from 1000 rpm, 242 at 1500 rpm, 270 from 1750 to 2000 and 224 Nm at 3500 rpm. Its maximum power output is 112 bhp at 3600 rpm.

New-generation technology

A number of technical developments derived from the extensive know-how of Peugeot’s engineers in terms of HDi FAP diesel engines, have made it possible to achieve these improvements. Between this new 1.6 litre HDi and its predecessor, more than 50 % of the parts have been entirely redesigned.

For example, like the new V6 3.0 litre HDi and 2.0 litre HDi diesel engines that were launched this year, Extreme Combustion Chamber System (ECCS) technology is much to the fore.

This state-of-the-art combustion chamber design offers:

a lower compression ratio (16.0 compared to 17.5 previously) for enhanced performance and reduced emissions (including NOx).
an increase in the diameter of the combustion chamber (+10%), helping to reduce the quantity of unburnt fuel as a result of less contact with the chamber “walls”.
a reduction of the SWIRL (air movement in the combustion chamber) of nearly 10%, thereby reducing heat loss against the walls.
This technology is combined with a new common rail injection system (Continental Automotive System) where the injection pressure is increased to 1,650 bars (compared to1600 previously) as well as new piezo-electric injectors with seven apertures (instead of solenoid injectors with six apertures as fitted to the previous 1.6 litre HDi diesel engine).

The engine management software has also been entirely redesigned to give this unit more comprehensive injection mapping (up to 5 injections per cycle), improved efficiency and better diagnostics for after-sales service. This helps to improve the homogeneity of the air/diesel fuel mixture for maximum performance, reduced fuel consumption, a reduction of emissions at source and quieter combustion.

The engine also uses a Honeywell Turbo Technology variable-geometry turbocharger optimised in terms of its size. Being smaller, it has a lower inertia, reducing response times to a minimum. An improved exhaust gas recirculation system (EGR valve) and the reduction of internal friction losses allows maximum enhancement of engine efficiency while minimising potential energy losses. Like its predecessor, this 1.6 litre HDi comes as standard with a diesel particulate emission filter (FAP) with a service life of 112,000 miles.

This new engine will be available in the 308 CC in both Sport and SE trim levels and will be known as the HDi 112.

Author: admin

Share This Post On